|
Ningbo Grandlifting Co.,Ltd.
|
Blog
Any time you have two metal surfaces transferring in near quarters with every solo other when you do within a Hydraulic jack, there will in all likelihood be friction. in which there's friction, there should be considered a lubricant to provide a thin, slippery wall of separation in between the two metal surfaces. although the hydraulic fluid provides all from the lubrication required in the hydraulic system, only grease can provide the lubrication needed using the components from the jack that aren't element from the jacks' hydraulics.
Instructions
1
Locate the grease nipple concerning the jack. The owner's guide using the jack will provide the area from the nipple.
2
2
suit the grease gun fitting--located concerning the finish off from the hose that extends outward by means of the grease gun--over the grease nipple.
3
Pump the deal with concerning the grease gun until grease oozes from near to the grease gun fitting.
4
4
Remove the grease gun fitting by means of the jack's nipple.
5
5
Raise and decrease the jack many instances to distribute the grease.
